For the production of high-strength concrete in cold climates
Free from chloride, sulfate, based on melamine, formaldehyde condensation.
For use in manufacturing where a smooth and very fine surface is required.
It helps to reduce the water a lot, there are less air channels resulting in a smoother surface
Add early strengths and peaks.
Increase the ability to work without losing strength.
It is used to give concrete a very high workability.
Making it possible to pour large or difficult
Little or no vibration
It works by absorbing the cement grit onto the surface causing it to precipitate.
More uniform particle distribution
To significantly reduce the water demand of a concrete mix without reducing workability, allowing greatly increased early and ultimate strengths without additional cement.
To significantly improve the workability of concrete without increasing water demand.
Particularly suitable for increasing workability of ready-mixed concrete at elevated temperatures.
To reduce concrete permeability and thereby reduce water penetration and enhance durability.
Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs.
Workability loss in high workability concrete is slower than normally found with superplasticisers.
Major increases in strength at all ages without increased cement contents are of particular benefit in precast construction.
Reduction in water: cement ratio enhances durability, producing low permeability concrete with reduced shrinkage cracking potential.
Chloride free, safe for use in prestressed and reinforced concrete.
